I was assured by the internet, I was paranoid, blah blah safety...
Then a few weeks ago something about Minnesota and ICE making drones illegal to fly or something...
The weird part is that, in that 15 years, I've become more moderate and pro-democratic rule of law... but I was right about my previous concerns. Not that I believe in the Justice behind them anymore.
EDIT: To be clear, my belief is that a plurality of the voting population voted for this, that much is obvious.
My belief is also that despite the fact that the current administration was elected, there are democratic norms and rules for what outcomes require that a bill must be passed to enact, that states can decide how they can govern themselves within well defined bounds.
All of this is being ignored despite the structures defined in the American democatric system, not because of it.
The majority in this country is "didn't vote". Multitudes of reasons for this.
They forgot.
They dont care.
They missed the registration deadline.
They're homeless, and no address.
They can't get proper papers, even though they are US born.
They're in prison/jail.
The candidates suck, so you dont vote.
Can't afford to take time off work.
They've been gerrymandered, so their votes are significantly degraded.
To think that the minority segment that, due to election game rules and FPTP, that a minority of the minority somehow reflects a majority? I wholly reject that.
[0] https://www.brookings.edu/wp-content/uploads/2017/01/vitalst...
There are ways to do better. A national holiday for elections has been mentioned countless times.
We could do like Australia and mandate required voting.
Prisoners should be able to vote. But this country is too hell-bent on punishment.
Registration can be made on the same day of voting, rather than some states require 30 days, and others per state.
But in reality, none of these are done. Changes are glacial, if they do happen.
But these would all increase a democratic choice. Right now, its a horrendously gamified minority of a minority who decides, based on electoral college results.
You see how it's impossible to regulate technology? I don't want my tax dollars funding impossible missions.
Sure. But let’s get rid of all early voting and mail in balloting. No excuses right? Throw in voter id too.
> We could do like Australia and mandate required voting.
I never quite understand why mandatory participation is a meaningful goal. If people are neither informed nor interested, why do you want them to have a say at all? At best they’ll be picking a last name that sounds pronounceable. Or going with whichever first name sounds more (or less!) male.
> Prisoners should be able to vote. But this country is too hell-bent on punishment.
We already strip them of their freedom of movement. Why do you want everyone up to and including rapists, pedophiles, and murders voting? Is there a particular voting bloc that you think would add value with their point of view?
> Registration can be made on the same day of voting, rather than some states require 30 days, and others per state.
I’m generally for this though there are a bit of logistics when you’re dealing with preprinted paper ballots and some expectations of processing quantity. Prior registration also addresses people showing up at the wrong polls in advance.
> But in reality, none of these are done. Changes are glacial, if they do happen.
Not always a bad thing either. If all it took was the stroke of an executive’s pen, you’d see a lot of things I bet you would not be fond of rather soon.
> But these would all increase a democratic choice. Right now, its a horrendously gamified minority of a minority who decides, based on electoral college results.
The electoral college is a feature. It forces you to win across large and small States.
This is true, but it's also very useful in assigning blame (or avoiding assigning it improperly).
So for all the people who complain about all the people who didn't vote, and try to blame them for Trump's election, we can just point to the historical record for voting in US presidential elections. The truth is: the turnout was not unusually low. In fact, it was somewhat high, historically speaking (though not as high as in 2020, which was a record; you'd have to back to the 50s or early 60s to see a higher turnout, and that was in a time when Black people weren't allowed to vote in many places).
So instead of blaming non-voters, blame can be assigned properly to those who DID vote. Because the factors that have prevented many people from voting in past elections were still a factor in the most recent election.
>We could do like Australia and mandate required voting.
Right, and how do you enforce this when people aren't allowed to take time off from work to vote? Also, looking at the state of Australian politics, I don't see mandatory voting as a worthwhile fix.
>A national holiday for elections has been mentioned countless times.
Lots of people have to work on national holidays. How do they vote? Society doesn't stop needing police, firefighters, or hospital workers on national holidays. And most stores (like grocery stores) are still open, so their workers are required to go to work too.
More importantly, why do you think the GOP would ever agree to any measures to increase voter participation?
I don't see how forcing a person to vote will result in carefully considering what to vote for.
A right to vote includes the right to not vote.
It's more a compulsory show you're still a citizen day. The making a valid vote part is down to personal choice.
They also appear to have generally better general political awareness and engagement in policy.
Then add an abstain option to the ballot while still requiring people to show up and select the box. While I do think voting should be mandatory, I'd say that we should make it substantially easier. More polling places, mail in voting, having a mandated paid day off to vote and having more than one day to vote in person would go a long way to making the requirement workable.
People who don't bother to vote for any reason changes elections. It also makes it very hard to make claims about what the majority of Americans want, since so many didn't make their opinions known
Yep, that's exactly what the fed undercover will say.
And sure, they can't catch everyone, but they don't have to. They just need to catch and visibly prosecute enough people to create a chilling effect. It's about making it harder, not making it impossible.
Whether the cost/benefit here justifies those gains is a different question.
Many people already do get the option to ditch out of work to go vote. And it's not logistically possible for _everyone_ to have the day off. So really this is just a matter of sliding the scale a bit so _more_ people can vote; at the cost of more inconvenience.
Personally, I'd rather just make mail-in voting more common.
> Sure. But let’s get rid of all early voting and mail in balloting. No excuses right? Throw in voter id too.
Why does having a day with "more people off work to go vote" mean we make voting harder in other ways? I don't understand what you're trying to say/imply here.
> > Prisoners should be able to vote. But this country is too hell-bent on punishment.
> We already strip them of their freedom of movement. Why do you want everyone up to and including rapists, pedophiles, and murders voting? Is there a particular voting bloc that you think would add value with their point of view?
Because, like it or not, they are citizens, and citizens get to vote. Do I think most pedophiles have much to contribute to the process? No, probably not. But there's a LOT of prisoners that are guilty of much lesser crimes; ones that don't imply their vote shouldn't matter.
> The electoral college is a feature. It forces you to win across large and small States.
Challenge. But this is very much an opinion thing.
There's no reason that a holiday to give people time to do it requires or logically leads to either of those, no.
>I never quite understand why mandatory participation is a meaningful goal.
Mandatory participation generally includes write-in and abstain options, but requires people to participate in the process. Making it mandatory defeats the measures taken to stop groups of people from voting (insufficient polling places for long lines, intimidation keeping people away, purging voter rolls, etc.)
>We already strip them of their freedom of movement. Why do you want everyone up to and including rapists, pedophiles, and murders voting? Is there a particular voting bloc that you think would add value with their point of view?
Because it's easy to file bullshit charges against anyone you don't want voting, and because something being illegal doesn't make it morally wrong, so people should be able to vote to change things even when being persecuted for them.
"Staying home" is not actually a vote, as much as people want it to be in their heart of hearts.
edit: sorry, I was wrong, he did not quite clear 50% -- looked it up and he got 49.8%.
At least 25 years. That's the time passed since the first introduction of Eurion marks on banknotes. As far as I know, noone has used it to block reproduction of anything other than money.
My Plato hating friend, my "called it" list is filled with things the old-timers at the time said no one would be stupid enough to, and the old codgers went and died on me so I can't even give em a good lambast. I believed them, and helped them build things... Now I get to watch things get coopted by a madman and a NatSec apparatus. Pour one out.
A majority of Americans either wanted Trump or didn't care enough to vote against him.
There’s valid concern with these types of laws and scope creep. But there’s also precedent which shows they can work and be applied reasonably.
An easy one would be to have people vote on weekends instead of Tuesday.
The second would be to have more polling station so that people don't have to wait hours to be able to vote (alas this seems to be by design).
Since we are there, but unrelated to the amount of people voting, fix the vote counting process so that you can get the result the following day.
The stuff above is not rocket science and is what most of the other civilized countries do.
If people still don't go out and vote, probably is because both candidates suck, or they don't look so much different one from the other. Fixing this would require changing the electoral system, which is not something I see done anytime soon in the USA
And that radio jamming no longer neutralizes that threat.
https://en.wikipedia.org/wiki/Voter_turnout_in_United_States...
I don’t live in the US, but US elections have quite an influence and it’s frustrating to see a system I perceive as very flawed having such an effect here, at the other end of the world in New Zealand.
Surely you want the leader that most Americans voted for?
When votes are held in the senate or congress, it’s a straight numbers game. Why aren’t those votes also weighted?
There wouldn’t be many who’d argue that the American political system is in good health. How would you fix it?
Prusa is king. High quality. Open source. EU made and engineered. Slicer is a market leader (Bambu's a fork of it).
On the other hand, if I need a replacement part for something, it's unlikely I will find the manufacturer giving me models for it. And if a manufacturer is giving me models for it, they probably do so with the explicit expectation that I might end up using them to manufacture a replacement.
In most cases either me or some other volunteer will need to measure the existing part, write down all the critical measurements, and then design a new part from scratch in CAD.
Even if somehow you are able to fingerprint on those critical measurements, that's just _one_ part.
The only way this kind of nonsense law could work is if you mandate that 3D printers must not accept commands from an untrusted source (signature verification) and then you must have software which uses a database to check for such critical measurements, ideally _before_ slicing.
Except that still doesn't work because I can always post-process a part to fit.
And it doesn't work even more because the software will need to contain a signing key. Unless the signing key is on a remote server somewhere to which you must send your model for validation.
This is never going to work, or scale.
There are even more hurdles... I can design and build a 3D printer from scratch and manufacture it using non-CNC machined parts at home. A working, high quality 3D printer.
Where are you going to force me to put the locks? Are you going to require me to show my ID when buying stepper motors and stepper motor drivers?
What about other kinds of manufacturing (that these laws, at least the Washington State ones, also cover)?
Will you ban old hardware?
What about a milling machine? Are you going to ban non-CNC mills?
These are the most ignorant laws made by the most ignorant people. The easiest way to ban people from manufacturing their own guns is to ban manufacture of your own guns. But again, this is a complete non-issue in the US where you can probably get a gun illegally more easily than you can 3D print something half as reliable.
They don't have to be exact circles, they just have to be some dots in about the right place. In the UK, the Bank of England issued notes with Elgar on them and the EURion constellation picked out in musical notes ;-)
But it's a premium brand now. For lighter use by hobbyists, Bambu is the clear winner on price/performance. The 'less open' downside is not a factor to most people, and the printers generally work so well out-of-the-box that repairability isn't as much of a concern as it was on printers of the past.
Personally I went from a Prusa MK3s to a Bambu P1P (after looking long+hard at Prusa options), and so far, no regrets. (Although I've kept the old Prusa as a 2nd printer and upgraded it to a MK3.5, but mostly just because I do enjoy a bit of tinkering with them)
In Argentina, elections are held on Sundays.
They are weighted - the House is allocated by population, and the Senate by state.
I'm new to 3D printing, so grains of salt abound, but since I started in on the hobby this Christmas, I've purchased four 3D printers. 3 budget-but-highly-regarded kings to start, but they all gave me tons of trouble. The Elegoo Centauri Carbon I got for Christmas that sparked this mess is a budget knockoff of the Bambu X1C, but in the first 30 days of ownership, I experienced 2 hardware failures that (thanks to having to ship parts from Mainland China) have resulted in 16 days of downtime.
To deal with the downtime, I bought a stopgap Qidi Q2, but it had tons of problems -- problems which, according to the reviewers, have all been solved for. Ambiguous error messages. Poor English. Choices between "OK" and "Confirm", neither of which advanced the system. Mainboard errors. Extruder failures. Boot failures. Firmware upgrade failures. I experienced all of these within the first 3 hours of ownership, and filed for a return.
I was working on a project that needed a printer, and now despite having bought a bunch of printers, I didn't have any printers that could print. Looking around locally at what I could buy that day amounted to either a Bambu P2S or a Sovol SV08. I struggled here, because I would _much_ rather be the Sovol owner than the Bambu owner, but I needed a printer, not a project, and so I decided I'd try out the Bambu until I got done with what I needed it for, and then I'd return it.
But it turns out it was amazing. The others (admittedly, budget units) were loud and cantankerous, but the Bambu was only uncivilized for a few minutes of each print, and the rest of the time you barely noticed it running. The ecosystem is obviously great. Being able to monitor jobs or initiate prints from my phone is admittedly a novelty, but it's a nice one, and one that speaks to a consistency of integration. But the important part is that it just worked. There were printable upgrades available, I didn't need to print modular pieces to fix design flaws like the other units. I didn't need to move it further away to deal with the noise. I didn't need to investigate arcane error messages because none ever arose.
Now, I haven't owned a Prusa, so I'm not trying to compare them. I understand that Prusa hardware quality is amazing. I believe that. I'm also wildly interested in the community efforts to implement tool-changing with INDX and INBXX, and they're the kinds of projects that I want to tinker with. But if I'm to own a Prusa, or a Sovol, or a Voron, it'll have to be as my second printer (well technically third, because I still own the Elegoo because it's too cheap to bother trying to return) because most of the time I want to print things, not tinkering with the printer. But while the Prusa machines might be amazing, the Prusa XL is wildly expensive for 5 colors, and the Core One right now can't be bought with multi-color capabilities.
I'm not trying to argue against Prusa here, but the idea that only shills are into Bambu seems flatly wrong. I am ideologically opposed to how Bambu got to the market position they've reached, and for sure they've undoubtedly got a fair amount of shills in their employ but sadly, their products more than live up to the hype.
Pretty sure those 50 thousand or so civilians killed on the street in the recent Iranian protests/riots would have been a lot less, if all those Iranians had easy access to guns, and not just the government.
Drones are not enough, you still need boots on the ground for you to claim control over a territory, and boots on the ground think twice about signing up for service if that includes facing armed mobs with guns on a daily basis.
So no, mobs with guns are not obsolete.
So, if one sees the whole of IRGC plus Basij as the "commandos", they alone form an active elite of about 0.5%, if one sees the entirety of the military+police we're looking at easily 2-3 million units, so up to 2%.
[1] https://en.wikipedia.org/wiki/Islamic_Revolutionary_Guard_Co...
[2] https://en.wikipedia.org/wiki/Islamic_Republic_of_Iran_Armed...
Drones cut both ways. You’re correct that it allows a small number of people loyal to the regime to asymmetrically oppress a large population. But drone technology is in theory accessible to the populace in an industrialized country.
In the last decade, most 3d printer users were hobbyists and liked to know the internals of the machine they were using.
That's why there are so many useless models of random gadgets on thingiverse. People didn't care about the output, more about the process.
With the arrival of bambu and the last Creality, the market has shifted to a plug and print model where more and more buy the printer as a tool to produce and output and they don't care about the internals or gcode.
They must be able to control their printers from their phone.
The people that started in 3d printing when they had to assemble the whole machine by hand are now sad to see their hobby replaced by something too easy, it feels like cheating.
"How come you don't know how to level the bed and measure the offset with a piece of paper? "
Just like senior dev are sad to see vibe coding replace "true development craft".
https://www.npr.org/2025/06/26/nx-s1-5447450/trump-2024-elec...
The average person who doesn’t vote is a low-trust individual who is skeptical about government and institutions. Those people are Trumpier than average.
That strikes me as extremely counterproductive given the actually sensitive part of a BP is an (outside of the US) unsigned, semi-publicly-documented barcode.
Their QC and customer support has gradually been getting worse. Their printers are rarely competitive feature-wise. Several printer lines are quietly being retired - with bugs remaining open for years and new features only occasionally being backported from other printers. The open-source part is mostly abandoned due to cheaper third-party clones abusing it.
Don't get me wrong, I really like my Prusa printer, but in 2025 I'd have a really hard time justifying buying another one. The "Prusa premium" just doesn't seem to be worth it anymore.
Cory talked about this. https://www.youtube.com/watch?v=39jsstmmUUs
The far more likely explanation is that they just don't want people filming them. They can't legally stop someone with a cellphone from filming them, but that hasn't stopped them from using up-to-lethal force against observers. On the other hand, you can't exactly beat a flying drone into submission, so the obvious move is to observe using drones instead.
Luckily for ICE the FAA already has the mechanics in place to criminalize flying drones in certain places, so with their magic "no drones anywhere we operate" NOTAM they can now punish observers with a year of jail time.
Prisoners voting is madness. They are in too dependent a position to believe that their vote will reflect their votes.
On the contrary, voting should be banned not only for prisoners but also for people working for the government in any capacity. People who live off taxpayers should not be able to decide how to spend their taxes.
Registration procedures should be more complex and strict, not simpler. If someone is irresponsible, disorganized, or illiterate enough to fail to fill the form on time, then why should we consider their vote meaningful? If someone believes they have more important things to do than vote, why force them to vote?
But if nobody was fixing the problems everybody was experiencing except Bambu, then frankly, good for Bambu.
Boo to the gate-keepers. Vorons still exist and likely always will for those that want to dork around with printers, but for the rest of us, printers that work empower the field. In the past 5 weeks, I've started to learn and understand how 3D printers work, I've started to do some simple 3D modeling, and I've begun making models with OpenSCAD, which wasn't a thing that I knew existed before. Those parts are currently on Github.
I've organized a billion things. I've modeled a corner for my weird desk's keyboard tray so that it stops cutting my knees when I swivel my chair too quickly. I've delighted my wife by printing some conveniences. I have (admittedly infinitesimally) advanced the availability of 3D models in a way that I simply would not yet have if I were still messing around procuring the Voron parts list. Quality tooling advances the craft as it makes it more accessible.
But the main thing is that it doesn't actually help anybody for 3D printing to be more difficult, nor does wanting Bambu to be bad make them not good. They are good, and they're leaps and bounds better than most of the products in the field.
The fact that ~20% of the population either wants to vote but is unable to do so or is disillusioned about the democratic process to the point of not voting at all is extremely worrying. This is not what a healthy democracy should look like.
The Taliban are a military and political group compromised of an ethnic minority in Afghanistan. It's not even that the US lost to "goat herders with guns". We failed to secure a small country against a well organized, armed minority.
(And I stayed once I saw the quality. Likely Prusa can match or exceed it, but not with what I was willing to lose from my wallet.)
I prefer not to live in the Hunger Games world, personally.
Those books are a brilliant exploration of the tyranny of urban clusters.
The electoral college is an effective foil to that.
The US tried to do this kind of "literacy test" before, remember? It's where the expression "grandfathered in" comes from: you had to do an impossible-to-pass test to gain the right to vote - except if your grandfather had the right to vote.
This was of course used to ban black people from voting without explicitly banning them for being black.
> Prisoners voting is madness
If prisoners can't vote, what's stopping the party in power from preventing them from ever losing an election by just jailing everyone expected to vote against them?
> People who live off taxpayers should not be able to decide how to spend their taxes
This should obviously includes everyone working for government contractors. Which is obviously going to include everyone working for any kind of tech company with any government contract. Which, considering HN demographics, means you likely shouldn't e allowed to vote.
Heck, why not extend this even further? Anyone living in a state which receives more money than it contributes in taxes should be banned from voting. Anyone using government resources should be banned from voting. Everyone driving their car on government-maintained roads should be banned from voting!
About half of all folks in US prisons are there for non-violent crimes, and we're talking about a relatively small percentage of voters anyway. Maybe ~3 million added to the ~244 million eligible voters
2) The weapons culture of the US is so obsolete that there are government officials parroting lines about it not being legal to carry a concealed weapon during a protest in Minnesota when it is, actually, very much legal. That is to say, it's not obsolete at all. Given the prior public stances of the Trump administration on firearms, this is incredibly telling, and all the more reason why you can't trust people like them.
Where did I mention a "literacy test"? I'm against such tests for exactly the same reasons I'm against prisoner voting.
> If prisoners can't vote, what's stopping the party in power from preventing them from ever losing an election by just jailing everyone expected to vote against them?
Prisons, by definition, are built on the principle that prisoners are under the full control of prison administrations. If everyone who will vote against could be imprisoned, there would be no problem allowing prisoners to vote: prisoners would still vote in the manner desired by the prison administration. That's how prisons work. And I don't think there's a need to increase incentives for authorities to imprison more people to achieve the desired election results through prisoners' voting.
> any kind of tech company with any government contract.
Obviously, this shouldn't apply to "any" government contracts. But if the majority of a contractor's income comes from government contracts, then yes, employees shouldn't vote.
> Anyone living in a state which receives more money than it contributes in taxes should be banned from voting. Anyone using government resources should be banned from voting.
I don't understand why you're trying to reduce this argument to absurdity. The goal is to preserve democracy by reducing the government's ability to build a totalitarian dictatorship through its ability to control taxes. And yet you're proposing measures that would proclaim such a dictatorship.
I might be a software engineering but I’m not going to waste time writing a bootloader for my next PC when it is a solved problem.
On the flip side in any domestic insurrection, the soldiers know the terrain, language, customs and culture of the people, the supply lines are nothing (rather than having to airlift materiel and people thousands of miles, you drive them on regular roads), the infrastructure supports espionage, most people support the regime and will collaborate to return to stability (since they voted for it), the regime never leaves (you can leave Afghanistan, you can't leave your own country or it ceases to be a country), and if you lose, you lose territory and/or politicians run the risk of violence. The stakes are why these comparisons are never relevant.
I have a 10 year old kit-built prusa I3 sitting next to me. Its brother is in the basement next to a kossel. It's been years since they have seen action, there is a litany of small bits of work they need.
I unboxed an A1 Mini and it's been like an epiphany. I've been printing almost nonstop. It's so much FUN. I just send from my phone and it just works. Everything has been nearly flawless until last night where half a batch of mini utility knife frames started to spaghetti, probably my fault for not fully cleaning the build plate in a bit.
Beats the hell out of glue stick or blue tape, fussing with slicer params, babysitting the first layers, etc etc. Fuck that, gimme the cheat.
I will always admit that maybe I was just unlucky with my S1 but both the printer and the ACE was horrendous experiences and I wouldn't recommend them to anyone based on my problems with them.
Why can't you be both. I loved my time with my Ender 5 Pro, I had it for 3 years and I will always freely admit that 90% of the fun was with the tinkering to make the machine work correctly. But you know, you get bored of it. I got an H2D just before christmas and it's incredible to have a machine that "just works". I can print things for myself and others and not worry whether it's going to work or not - it just will.
Same as I used to tinker with my cars when I was younger, now I want an appliance car - I want to get in, press start and drive across europe not worrying whether I'll have to fix it on the roadside or not. I would say it's just getting older, but I Don't think it is - I think everyone goes through stages of developing things they enjoy about their hobbies.
Yes, the initial purchase price is higher, the lifetime price might not be.
https://edition.cnn.com/2025/12/18/politics/patriot-games-an...
To give another example, the whole modern anti-vaxxer movement was started by a doctor to sell bogus tests.
If you don't care enough to inform yourself about the candidates or at least have a party affiliation, it's probably best that you don't vote.
The upgrade kits are definitely a good thing, going from MK3 to MK3S to MK3.5S was a worthwhile upgrade path and has prolonged the useful life of the printer. But they have their limits.
(And with 3D printing going more mainstream, there's a large segment of the market that has no interest in building printers from kits or stripping down printer to install upgrades - even though some of us find that quite enjoyable)
Go ahead, try that
That makes efforts far more durable.
Than it’s a matter of showing up in court to defend attacks against the law(s) that protect it.
In this way, we can have durable change, but it’s a high cost road. By design I am sure.
Because what happens in the ballot box is private, it should be possible to let prisoners vote without interference as long as poll workers are allowed inside to do their job, but it's not just people currently in prison you have to worry about. There are places where convicted felons can lose their right to vote even after they've served their time and laws like that have already been used to suppress votes.
> The goal is to preserve democracy by reducing the government's ability to build a totalitarian dictatorship
Freedom means having enough rope to hang yourself with. By strictly limiting who is allowed to vote and taking that right away from millions of Americans you'd be destroying the country, not saving it.
I bought the Core One kit to understand better how the machine works, which reduced the price delta somewhat.
It remains to be seen over the long term which way is actually better financially, as Prusas have historically had long lives, while there is only limited data on the Bambu Lab side yet.
So far, I am quite happy with my decision. But competition is on. I am excited about the upcoming INDX system for the Core One: if it delivers on its promise, it will be fantastic!
Then the americans tried. They were not goat herders. They failed.
The pattern is clear.
Maybe the framers can go fuck themselves.
Yet the framers quite literally told you to change what they made, so they agree.
You can still make an open source printer with some extrusion and stepper motors, same as always.
Stupid people already vote. Wrong people already vote. Your system has to accept that interference no matter what.
Neither does DRM, really, but it certainly causes a great deal of inconvenience, and is upheld by the legal system.
> Voters saw Harris as more ideologically extreme than Trump
... what?
This is a good and appropriate thing. States are approximately countries. Most laws only exist at the State level e.g. most common crimes don't exist in Federal law. The overreach of the Federal government claiming broad authority over people is an unfortunate but relatively recent (20th century) phenomenon. The US does seem to be returning to States having more autonomy, which I'd say is a good thing.
The latest Harvard-Harris poll, which isn’t good for Trump, still shows people want to deport all immigrants here illegally by a 52-48 margin: https://harvardharrispoll.com/wp-content/uploads/2026/02/HHP... (page 24). I don’t think even Trump intends to actually do that. He would have to dramatically escalate what he’s doing now in order to achieve that outcome.
I think, if anything, the problem is when people buy a cheap clone and blame Prusa when it fails.
No longer being able to vote seems like a rather petty inconvenience to heap on top
Around 2021 I spent quite a lot upgrading and dialing in an Ender 3 V2 so it was repeatable, whisper-quiet, and dead reliable.
That's it. This doesn't end with me buying a Bambu. It's still all of those things. I'm very happy with my printing appliance, and also that its only data connection is via microSD sneakernet.
The law doesn't care about licensing, there are just 2 groups of printers - those that follow the law and implement effective blocking technology and those that don't.
If BBL sells an open source printer that allows someone to trivially bypass proposed mandatory blocking technology, they'll be fined and held liable for any crimes that result from guns printed using their 3D printers.
So BBL, as open source as they might want to be, is not allowed to sell such a product.
And the Prusa is a real workhorse. I’ve only had a couple problems in almost a decade.
A lot of the hobby is people printing out useless things. But the it doesn’t even work for people who are interested in learning CAD. There’s no surprised everyone is turning to Bambu. So will I when my Prusa breaks or there’s a sale too hard to pass up.
My Ender that I had purchased years earlier sat in the closet gathering dust because of how much of a pain it was trying to dial in the bed to level, etc. I took a second chance at 3D printing on the Bambu, but might not have if it were costly.
If someone now tells me a Prusa (or whatever) is as good as and simple as the Bambu, I would not hesitate to spend even double.
I’m really liking my (better specs for less money) elegoo centauri. I compiled the slicer from source because there weren’t Linux binaries.
All problems solved. It even happily prints exotic stuff like TPU, which I guess bambu has been cracking down on for unclear reasons.
Maybe I don’t know what I’m missing, but I’ve had zero issues downloading files (even from bambu-centric websites) and running them through the slicer.
I can’t imagine wanting to use their cloud whatever thing, or it providing any value beyond the open source stacks.
If they cared even a little bit about gun violence, they’d focus on mental health and other preventive measures.
If they just wanted to provide the illusion that they cared about gun violence, they’d go after high-volume manufacturers first.
This reminds me of Trump’s Venezuela coup. I’m offended they aren’t even bothering to properly lie about their motives.
If you were paying any attention at all, you'd see pretty much every 2A community, advocate and lobbying group was outraged by that statement and made statements against it.
Having said that, it is actually illegal to carry a firearm to go commit crimes like destroying government property, assaulting federal officers and obstructing them in carrying out their constitutional duties.